Luky SolutionsRope access work
ES
Rope access · Jávea and the Marina Alta

Solutionsat every height!

We repair, protect and maintain facades, walls and trees in hard-to-reach places using rope access and other work-at-height solutions.

Luky Solutions
Scroll down and descend with us
01Setting up

Rigging and secure anchors

Before going over the edge we study the access, the surroundings and the work area. We rig two independent lines, a working line and a safety line, on checked anchors.

02Cutting back

Opening up cracks and damaged areas

We open up the crack and remove loose material down to sound substrate. We cut back visible cracks, loose render and finishes at height.

03Sealing

Sealing and waterproofing

We fill and seal the crack with the right material for the substrate, and treat joints and sensitive points against water ingress.

04Difficult access

We reach where scaffolding won’t fit

We move across the facade on ropes, without blocking the pavement with structures. One-off solutions where conventional access is simply impractical.

05Painting

Technical exterior painting

We prepare the substrate and apply exterior finishes on large faces and awkward spots.

06Finish

Full sections, top to bottom

We paint whole sections as we descend, so there are no joins or differences in tone.

07Result

Facade renovation

The facade gets its looks back and is protected from the sun, salt and rain of the coast.

08Facade removals

Hoisting heavy items through the balcony

When a sofa, wardrobe or appliance will only fit through the balcony, we hoist it up or lower it down the facade with pulleys and ropes, without using the stairs or the lift.

09Tree work at height

Tree work at height

Specialist tree climbing: we climb into trees to clear dead branches and prune those touching the facade, the roof or cables.

Real job

Repairing a balcony edge

One of our jobs from start to finish: from spalled concrete to the final repair, all done on ropes.

Crack along the edgeBefore
Crack along the edgeThe crack runs along the whole edge of the slab.
Spalling from corrosionDuring
Spalling from corrosionCutting back revealed spalling caused by the corroded reinforcement. We sanded the steel and applied a passivating treatment that protects it from further corrosion; then rebuilt and painted.
Rebuilt and paintedAfter
Rebuilt and paintedEdge rebuilt, sealed and given an exterior finish.

Crack in a facade wall

An open crack letting water into a high wall, repaired on ropes.

Crack with water ingressBefore
Crack with water ingressWater was getting in through the crack and staining the wall.
Wall repaired and paintedAfter
Wall repaired and paintedCrack cut back, sealed and the section repainted.
On the ropes

How we work

Real photos from our jobs in the Marina Alta. No stock photography.

Painting a facade at height
Painting a facade at heightSection painted with an extension roller, working down from the roof.
Cutting back a balcony edge
Cutting back a balcony edgeCutting out damaged concrete before treating the reinforcement.
It is this simple

From the first message to the finished job

Clear communication from the start saves time and helps us plan each job properly.

  1. 1

    Tell us about the job

    Give us the town and send wide shots plus close-ups.

  2. 2

    Get an assessment

    We will ask for anything missing or arrange a site visit.

  3. 3

    We agree and get on with it

    We define the scope before starting and carry out what was agreed.

Areas we cover
    Free, no-obligation quote

    Got a job at height?

    Send us photos on WhatsApp with the town and a short description. We will reply with a clear assessment.

    Phone and WhatsApp
    644 46 15 49
    Fast replySend photos